TUFLOW Message 2126
Revision as of 10:31, 29 May 2025 by Abrar.Alttahir (talk | contribs)
TUFLOW Message
ERROR 2126 - Material resistance values can only be specified for Manning's n at present.
Alternate Message
NA
Message Type
ERROR
Description
When using 2d_mat materials layers and a material file to define bed resistance for the 2D domain, the .tcf command "Bed Resistance Values == " must be set to "MANNING N". Refer to the TCF Appendix in the TUFLOW Manual for more details.
Suggestions
In the .tcf, set Bed Resistance Values == MANNING N.
If bed resistance values are specified using the .tgc commands Set CnM == , Read GIS CnM == or Read Grid CnM == ensure the Read Materials File == command is commented out or removed from the .tcf.
| Up |
|---|
 2xxx Messages
|