Check Files 1d to 2d gw
Revision as of 14:23, 7 July 2025 by Emilie Nielsen (talk | contribs) (Created page with "This GIS check file layer contains more information on the location of groundwater 1D/2D boundary links. Please refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/la...")
This GIS check file layer contains more information on the location of groundwater 1D/2D boundary links. Please refer to the TUFLOW Manual for more information on the SX connections to groundwater linking method.
Attributes of 1d_to_2d_gw_check
| Attribute Name | Attribute Description |
|---|---|
| GW_Level | The connected groundwater layer. |
| Z_Min_GW | The minimum elevation along the link. |
| Z_Bed_1D | The bed level of the 1D. |
| Primary_Node | The node ID of the primary 1D node. |
| Secondary_Node | The node ID of the secondary 1D node (if used), set to "N/A" if not used. |
| Weight_to_P_Node | The weighting to the primary node. |
| Weight_to_S_Node | The weighting to the secondary node. |
| Type_2D_Link | The type of boundary link applied to the 2D cell. For the groundwater connection, this should always be "SX" |
| Type_1D_Link | The type of boundary link applied to the 1D nodes. |
| Flags | The boundary flags that have been specified (if any). |
| Domain_Name | The name of the 2D domain the connection applies to. If a single 2D domain is used, this is "Domain_001". |
| fxob | The oblique boundary x factor. |
| fyob | The oblique boundary y factor. |
| Up |
|---|
 TUFLOW Check Files
|