Check Files 2d bg uvpt check

LINEAR: The default option. The depth averaged FLC value is linearly increased from the bottom of the bridge deck to the inflection point. After the inflection point, it gradually decreases.
LINEAR-CONSTANT: The depth averaged FLC is linearly increased from the bottom of the bridge deck to the top of the bridge deck. Between the top of the bridge deck and the inflection point, the FLC is kept constant. After the inflection point, it gradually reduces.
PARABOLIC: The depth averaged FLC is increased using a parabolic function from the bottom of the bridge deck to the inflection point. After the inflection point, it gradually reduces.
INVERTED-PARABOLIC: The depth averaged FLC is increased using an inverted parabolic function from the bottom of the bridge deck to the inflection point. After the inflection point, it gradually reduces.

Contains information on the cell sides (U and V points) that have a 2D bridge shape object applied. This contains information on the elevations, blockages, and form loss values applied at each layer of the bridge.

Attributes of bg_uvpt

Attribute Name	Attribute Description
Options	Method used to calculate the depth averaged FLC (Form Loss Coefficient). This is specified by the `BG FLC Default Approach ==` command. LINEAR: The default option. The depth averaged FLC value is linearly increased from the bottom of the bridge deck to the inflection point. After the inflection point, it gradually decreases. LINEAR-CONSTANT: The depth averaged FLC is linearly increased from the bottom of the bridge deck to the top of the bridge deck. Between the top of the bridge deck and the inflection point, the FLC is kept constant. After the inflection point, it gradually reduces. PARABOLIC: The depth averaged FLC is increased using a parabolic function from the bottom of the bridge deck to the inflection point. After the inflection point, it gradually reduces. INVERTED-PARABOLIC: The depth averaged FLC is increased using an inverted parabolic function from the bottom of the bridge deck to the inflection point. After the inflection point, it gradually reduces.
Z_Bed	The ground level of the z point.
Deck Soffit	The elevation of the deck soffit (m or ft).
Pier_pBlockage	The percentage blockage of the pier layer. For example, '5' for a blockage of 5%.
Pier_FLC	Pier layer form loss coefficient.
Deck_Obvert	The elevation of the deck obvert.
Deck_pBlockage	The percentage blockage of the deck layer.
Rail_Obvert	The elevation of the rail obvert.
Rail_pBlockge	The percentage blockage of the rail layer.
SuperS_FLC	The combined form loss coefficient for the deck and the rail layers.
SuperS_fIP	Inflection point (IP) factor.

In the image below, a 2d_bg_uvpt_check file is shown.

Up
TUFLOW Check Files

Check Files 2d bg uvpt check

Navigation menu

Search