TUFLOW Message 2938

TUFLOW Message
WARNING 2938 - "HPC Cyclone Boundary Update Interval" not set for HPC solver.

Alternate Message

Message Type
WARNING

Description
The surface stress and pressure data a Cyclone Boundary is updated on CPU side and sent to HPC side for hydraulic calculation. Due to the slower speed of the data tranfer beween GPU and CPU model HPC TLF error message ERROR 3010: Timestep must be >= 0.015
The minimum timestep has been reached, this changes for your selected cell size.

Suggestions
Inspect downstream boundaries for accidental flow back into the model (turn on vectors). Plot dt .csv file and HPC parameters.

Up
2xxx Messages