Page Under Construction

Introduction

Link to 2D section – this section explains 1D bridges only.
Advice on when you would model a 1D bridge versus a 2D bridge (read module 6).
Examples on a XZ and HW bridge type – pictures & csv examples
Information on the checks you can carry out
Theory
- Loss types (piers Kp, blockage Kb)
- Guidance/reference on how to derive losses
- Make sure to include section on automation of pier losses?
Method A & Method B for bridges – refer to Bill’s post on 1.56 value

Any further questions please email TUFLOW support: support@tuflow.com

1D Bridges