Difference between revisions of "1D Open Channels"
Rohan.king (talk | contribs) m (→Introduction) |
Rohan.king (talk | contribs) |
||
| Line 4: | Line 4: | ||
<br> | <br> | ||
=Introduction= | =Introduction= | ||
| + | Open waterways (channels) are most commonly modelled as "S" type channels, the S signifies a sloping channel that can handle steep, super-critical flows. Open channels can either be modeled as an inertial or non-inertial channel, the latter removes the Courant stability condition and is useful for stabilizing very short S channels with high velocities.<br> | ||
| + | '''Example of an open channel that could be modelled in 1D''' | ||
[[File:Photo 04-12-2014 09 54 45.jpg|border|400px]] | [[File:Photo 04-12-2014 09 54 45.jpg|border|400px]] | ||
| + | |||
| + | =Basic Commands= | ||
| + | Within the *.ecf the following commands and files are at a minimum required to a model an open channel:<br> | ||
| + | <br> | ||
| + | |||
| + | <font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font><tt>..\model\mi\1d_nwke_xxxxx.MIF</tt><br> ! network layer containing "S" channel alignments | ||
| + | <font color="blue"><tt>Read GIS Table Links</tt></font> <font color="red"><tt>==</tt></font><tt>..\model\mi\1d_xs_xxxxx.MIF</tt><br> ! corresponding cross-section polylines | ||
| + | |||
<br> | <br> | ||
<br> | <br> | ||
Any further questions please email TUFLOW support: [mailto:support@tuflow.com support@tuflow.com] | Any further questions please email TUFLOW support: [mailto:support@tuflow.com support@tuflow.com] | ||
Revision as of 02:31, 9 February 2016
Page Under Construction
Introduction
Open waterways (channels) are most commonly modelled as "S" type channels, the S signifies a sloping channel that can handle steep, super-critical flows. Open channels can either be modeled as an inertial or non-inertial channel, the latter removes the Courant stability condition and is useful for stabilizing very short S channels with high velocities.
Example of an open channel that could be modelled in 1D
Basic Commands
Within the *.ecf the following commands and files are at a minimum required to a model an open channel:
Read GIS Network ==..\model\mi\1d_nwke_xxxxx.MIF
! network layer containing "S" channel alignments
Read GIS Table Links ==..\model\mi\1d_xs_xxxxx.MIF
! corresponding cross-section polylines
Any further questions please email TUFLOW support: support@tuflow.com