ARR DATAHUB CANNOT BE ACCESSED

From Tuflow
Revision as of 15:33, 30 October 2018 by Ellis Symons (talk | contribs)
Jump to navigation Jump to search

Steps

  1. Run 'Extract ARR2016 for TUFLOW' tool in QGIS until error - This will let the tool download the data from BOM as well as perform the pre-calculations such as extract the catchment area and centroid from the input catchments
  2. Open 'log.txt' located in the tool output folder and extract the longitudinal and latitude values
    Log text coords.PNG
  3. Using an internet browser, navigate to the ARR datahub
  4. Input the coordinates of your catchment
  5. Tick on the 'Select All' box
    ARR datahub input.PNG
  6. Click Submit
  7. Navigate to the bottom of the page and click Download TXT
    ARR datahub downloadtxt.PNG
  8. Create a new .txt file called 'ARR_Web_Data_<catchment name>.txt' and save it in the data folder alongside the existing file 'BOM_raw_web_<catchment name>.html - The catchment name should be consistent with the name used in the QGIS tool. It will be the same as the BOM raw output and also be listed in the log.txt after name=
    ARR Web data.PNG
  9. Copy the text from the 'Download TXT to the newly created 'ARR_web_data' text file
    ARR Web data content.PNG
  10. On the ARR datahub page, navigate to the temporal patterns and click Download (.zip)
    ARR datahub download tp.PNG
  11. Extract the contents of the zip file
  12. Open '_increments.csv' in a text editor
  13. Copy the contents of the csv to the end of 'ARR_Web_data'
    ARR Web data content addtp.PNG