Arc Assign DEM Value to Points

From Tuflow
Revision as of 06:13, 31 January 2015 by Chris Huxley (talk | contribs)
Jump to navigation Jump to search

Introduction

This is useful for assign elevation for breakline points from a DEM. This requires spatial analyst.

Method

  1. From the toolboxes select, Spatial Analyst >> Extraction >> Extract Values to Points.

  2. Arc Extract Values to Points.jpg

  3. Set the input layer as the layer containing the points, the input raster as the DEM and an appropriate output filename.


Up
Go-up.png Back to ArcGIS