Batch File Not Running

From Tuflow
Revision as of 16:56, 31 January 2018 by ShuangGao (talk | contribs) (Created page with "=Description= When running TUFLOW with a batch file, the command prompt shows error before running any model, like the image below:<br> File: Batch_File_Not_Running.png |600...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

When running TUFLOW with a batch file, the command prompt shows error before running any model, like the image below:
Batch File Not Running.png

Suggestions

There could be a number of reasons this occurs, check the following:

  • The correct .tcf file was started;
  • The .tcf has been updated to point to the new geometry (.tgc) / boundary (.tbc) files;
  • Check files are being written (Write Check Files == command occurs in the .tcf / .ecf);

Another good check is to import the messages layer, and view the TUFLOW log file (.tlf) for any checks or warnings. It is often useful to search the .tlf for an input file name, for example, if breakline changes are not seen, search the .tlf to ensure the input file e.g. "2d_zsh_M03_thalweg" is being read in.