Difference between revisions of "Check Files 1d xsl"

From Tuflow
Jump to navigation Jump to search
(Created page with "To be created")
 
 
Line 1: Line 1:
−
To be created
+
The XSL check file contains information on the input cross-sections where specified as tabular data (as opposed to say a box culvert section which is defined by a height and a width).  At each input cross-section a GIS line is output containing the information in the table below.<br>
 +
The .csv [[Check_Files_1d_ta_tables | 1d_ta_tables check file]] contains the height varying properties for the section.<br>
 +
The [[Check_Files_1d_hydroprop | 1d_hydroprop check files]] which contains information on each of the channels (including interpolated and structures).
 +
<br>
 +
<br>
 +
'''Attributes of xsl_check'''<br>
 +
{| align="center" class="wikitable" width="75%"
 +
! style="background-color:#005581; font-weight:bold; color:white;"| Attribute Name
 +
! style="background-color:#005581; font-weight:bold; color:white;" width=75%| Attribute Description
 +
|-
 +
| ID||The cross-section ID, this is the input cross-section number and is unique.  It is also output in the [[Check_Files_1d_ta_tables | 1d_ta_tables check file]].
 +
|-
 +
| Manning_n||The Manning's n at the lowest point (bed) in the cross-section.  If no roughness value is specified on the cross-section (the Manning's value is specified on the channel), then a value of -1 is output.
 +
|-
 +
| Elev_at_Bed||The elevation at the lowest point in the cross-section.
 +
|-
 +
| Elev_at_Top||The elevation at the highest point in the cross-section.
 +
|-
 +
| Depth||The depth at the top of section.  I.e. the Elevation and the top - the elevation at the bed.
 +
|-
 +
| Top_Flow_Width||The flow width at the top of the cross section.
 +
|-
 +
| Top_Storage_Width||The storage width at the top of the cross-section.
 +
|-
 +
| Top_Flow_Area||The flow area at the top of the cross-section.
 +
|-
 +
| Top_Wet_Perimeter||The wetted perimeter at the top of the cross-section.
 +
|-
 +
| Source_File||The source file (.csv) file which the data was read from.
 +
|-
 +
| Attributes||The remaining attributes (the source file is excluded, see the above) in the GIS layer.
 +
|-
 +
| Source_Layer||The GIS file that the cross-section was specified in.
 +
|}

Latest revision as of 13:54, 25 June 2015

The XSL check file contains information on the input cross-sections where specified as tabular data (as opposed to say a box culvert section which is defined by a height and a width). At each input cross-section a GIS line is output containing the information in the table below.
The .csv 1d_ta_tables check file contains the height varying properties for the section.
The 1d_hydroprop check files which contains information on each of the channels (including interpolated and structures).

Attributes of xsl_check

Attribute Name Attribute Description
ID The cross-section ID, this is the input cross-section number and is unique. It is also output in the 1d_ta_tables check file.
Manning_n The Manning's n at the lowest point (bed) in the cross-section. If no roughness value is specified on the cross-section (the Manning's value is specified on the channel), then a value of -1 is output.
Elev_at_Bed The elevation at the lowest point in the cross-section.
Elev_at_Top The elevation at the highest point in the cross-section.
Depth The depth at the top of section. I.e. the Elevation and the top - the elevation at the bed.
Top_Flow_Width The flow width at the top of the cross section.
Top_Storage_Width The storage width at the top of the cross-section.
Top_Flow_Area The flow area at the top of the cross-section.
Top_Wet_Perimeter The wetted perimeter at the top of the cross-section.
Source_File The source file (.csv) file which the data was read from.
Attributes The remaining attributes (the source file is excluded, see the above) in the GIS layer.
Source_Layer The GIS file that the cross-section was specified in.
Retrieved from "https://wiki.tuflow.com/w/index.php?title=Check_Files_1d_xsl&oldid=8332"