Difference between revisions of "Ensight Tips"

From Tuflow
Jump to navigation Jump to search
Line 61: Line 61:
  
 
[[File:Ensight_007.JPG|800px]]<br><br>
 
[[File:Ensight_007.JPG|800px]]<br><br>
 
  
 
The time series viewing is controlled using the Time controls located above the Parts window (top left).<br>
 
The time series viewing is controlled using the Time controls located above the Parts window (top left).<br>
[[File:Ensight_008.JPG|300px]]
+
[[File:Ensight_008.JPG|400px]]
  
 
==Navigation Tips and Shortcut Keys==
 
==Navigation Tips and Shortcut Keys==

Revision as of 10:20, 13 February 2015

Introduction

Ensight is 3D Computational Fluid Dynamics result viewing software. This page contains a brief introduction to the software. A number of MapInfo tasks which are repeatedly used in viewing TUFLOW results are described below. If you have any suggestions to be included in these pages, please add them to the discussion page: Ensight Suggestions

Viewing Results

Data Preprocessing

Ensight requires an input file format which is different to the standard TUFLOW output types. RES_to_RES.exe is used to convert TUFLOW xmdf results into an Ensight compatible form. Directions how to do this are outlined here: RES_to_RES.exe

The utility will create the following three ensight file types:

  1. Ensight case file;
  2. Ensight geometry file;
  3. Ensight results files. A unique file is created for each result output variable and time step.

Ensight is a 3D computational fluid dynamics viewing software. An elevation dataset is required to lock the 2D TUFLOW results to a fixed horizontal plan (2D space). The TUFLOW model output result data type ZH is required for this purpose. This must first be specified as a TUFLOW command prior to running the simulation. Steps required to flatten the dataset are outlined in the flowing section, "Loading Data"
(eg. Map Output Data Types == h v q d ZH )

Loading Data

Run the TUFLOW utility RES_to_RES.exe to create the Ensight input data files from TUFLOW xmdf output.
Open the case file (*.case) in Ensight.

Ensight 001.JPG

This will load the 'Part' titled: 2D TUFLOW Elements as Case Item 1.

Ensight 002.JPG

Select the "Variables" tab within the data management window (bottom left) to view the model result scalar and vector datasets that were loaded.
Activate the relevant dataset that you would like to work with. In this example we have selected, Depth, Unit Flow, Velocity and Water Level.

Ensight 003.JPG

These results can be viewed by creating an isosurface of the dataset within the 2D TUFLOW Elements Case Item.

Right Click 2D TUFLOW Elements Select >> Create >> Isosurfaces

Ensight 004a.JPG

Within the isosurfaces window:

  1. Select 'Advance' (top right)
  2. Enter a unique name for the dataset. This will become the child Part name. (2D TUFLOW Elements is the parent Part title)
  3. Select the Variable you would like to visualize (e.g. Depth)
  4. Set Creation Type = Isovolume
  5. Set Constraint = Banded
  6. Define the isovolume range. The upper and lower extreme values for the datasets are listed within the variables table (bottom left of the interface)

Ensight 005.JPG Ensight 005a.JPG

Update the variable display contouring:

  1. Select the newly created Part (right click)
  2. Select Color by >> Select Variable
  3. When contouring, select the relevant maximum dataset. For example, for time varying Depth data, select Max_Depth. This will lock the contouring to the range of the maximum dataset. Block colors and transparencies can also be defined using this selection.

Ensight 006.JPG

The final visualization step requires that the parent Part, 2D TUFLOW Elements be flattened. Ensight is a 3D computational fluid dynamics viewing software. Flattening the parent Part locks the TUFLOW dataset to a fixed horizontal plan (2D space).

  1. Select the parent Part, 2D TUFLOW Elements (right click)
  2. Select Edit
  3. Set the Coordinates scale factor = -1 *variable
  4. Set the Z variable = Fixed_Bathymetry. For this option to be available, the model result data type ZH must be defined as a TUFLOW output (eg. Map Output Data Types == h v q d ZH

Ensight 007.JPG

The time series viewing is controlled using the Time controls located above the Parts window (top left).
Ensight 008.JPG

Navigation Tips and Shortcut Keys

Left Mouse Button
Holding the left mouse button whilst navigating in the viewport (graphics display)

  • Navigating mouse up-down = rotate about horizontal screen X-axis
  • Navigating mouse left-right = rotate about vertical screen Y-axis
  • Ctrl-key plus up-down or left-right navigation = rotate about Z-axis extending outward from the screen

Right Mouse Button
Holding the right mouse button whilst navigating in the viewport (graphics display)

  • Navigating mouse up-down or left-right = Model zooms in and out
  • Ctrl-key plus right button acts as a pan operation

Middle Mouse Button (Scroll)

  • Model zooms in and out

Shortcut Keys
F1 - Window will rotate about the screen X-axis by 45 degrees
F2 - Window will rotate about the screen Y-axis by 45 degrees
F3 - Window will rotate about the screen Z-axis by 45 degrees
Ctrl F1, F2, F3 rotates by -45 degrees about the screen axes

F4 - Spins the window – (try with the left mouse click)
F5 - Front view
F6 - Side view
F7 - Top view
F8 - Will return to last view before F5, F6 or F7 was pressed
F9 - Maximizes the graphics windows on the display; press F9 again or use Esc to go back

Extracting Results

Loading a Background Image

Creating an Animation