Ensight Tips

From Tuflow
Jump to navigation Jump to search

Introduction

Ensight is 3D Computational Fluid Dynamics result viewing software. This page contains a brief introduction to the software. A number of MapInfo tasks which are repeatedly used in viewing TUFLOW results are described below. If you have any suggestions to be included in these pages, please add them to the discussion page: Ensight Suggestions

Viewing Results

Data Preprocessing

Ensight requires an input file format which is different to the standard TUFLOW output types. RES_to_RES.exe is used to convert TUFLOW xmdf results into an Ensight compatible form. Directions how to do this are outlined here: RES_to_RES.exe

The utility will create the following three ensight file types:

  1. Ensight case file;
  2. Ensight geometry file;
  3. Ensight results files. A unique file is created for each result output variable and time step.

Loading Data

Open the case file (*.case) in Ensight.

Ensight 001.JPG

This will load the 'Part' titled: 2D TUFLOW Elements as Case Item 1.

Ensight 002.JPG

Select the "Variables" tab within the data management window (bottom left) to view the model result scalar and vector datasets that were loaded.
Activate the relevant dataset that you would like to work with. In this example we have selected, Depth, Unit Flow, Velocity and Water Level.

Ensight 003.JPG

These results can be viewed via creating an isosurface of the dataset within the 2D TUFLOW Elements Case Item.

Right Click 2D TUFLOW Elements Select >> Create >> Isosurfaces


Ensight 004a.JPG

Within the isosurfaces window:

  1. Select 'Advance' (top right)
  2. Enter a unique name for the dataset. This will become the part name.
  3. Select the Variable you would like to visualize
  4. Set Creation Type = Isovolume
  5. Set Constraint = Banded
  6. Define the isovolume range. The upper and lower extreme values for the datasets are listed within the variables table (bottom left of the interface)

Ensight 005.JPG

Update the variable display by

  1. Select the newly created part (right click)
  2. Select Color by >> Select Variable
  3. Select the relevant maximum dataset. For example, for temporal Depth data, select Max_Depth


Ensight 006.JPG

Extracting Results

Loading a Background Image

Creating an Animation