Difference between revisions of "FM Tute M01 ARC Code"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 5: Line 5:
 
=Method=
 
=Method=
 
<li>Import in an empty <b>2d_bc_empty_R.shp</b> layer from within the '''FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty''' folder.</li>
 
<li>Import in an empty <b>2d_bc_empty_R.shp</b> layer from within the '''FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty''' folder.</li>
<li>Save the layer as <b>2d_bc_hxi_FMT_001_R.shp</b> in the '''FMT_tutorial\FMT_M01\TUFLOW\model\gis''' folder. </li>
+
<li>Save the layer as <b>2d_bc_FMT_M01_HX_001_R.shp</b> in the '''FMT_tutorial\FMT_M01\TUFLOW\model\gis''' folder. </li>
<li>Open the <b>Inactive_area.shp</b> GIS layer from Module_Data\Module_01\gis folder. Select all objects from within this layer, copy and paste into <b>2d_bc_hxi_FMT_001_R.shp</b>. </li>
+
<li>Open the <b>Inactive_area.shp</b> GIS layer from '''Module_Data\Module_01\gis''' folder. Select all objects from within this layer, copy and paste into <b>2d_bc_FMT_M01_HX_001_R.shp</b>. </li>
<li> For all polygons assign a 'type' attribute of 'CD'. This designates the digitised polygon as a code polygon where the 2D cells within it may be either active or inactive </li>
+
<li> For all polygons assign a 'type' attribute of 'CD'. This designates the digitised polygon as a code polygon where the 2D cells within it may be either active or inactive. </li>
 
<li> For all polygons assign a 'f' attribute of '-1'. A cell code of '-1' deactivates all cells within the digitised code polygons. </li>
 
<li> For all polygons assign a 'f' attribute of '-1'. A cell code of '-1' deactivates all cells within the digitised code polygons. </li>
[[File:FMT QGIS 1D2D Code attribute.JPG|800px]]
+
[[File:FMT QGIS 1D2D Code attribute.JPG|700px]]
  
 
<li> Observe how the code polygon has been digitised between nodes FC01.35 and FC01.34. The polygon covers the area between these two Flood Modeller nodes. This is because overtopping of the embankment at this location has been represented in the 1D Flood Modeller component of the model.</li>
 
<li> Observe how the code polygon has been digitised between nodes FC01.35 and FC01.34. The polygon covers the area between these two Flood Modeller nodes. This is because overtopping of the embankment at this location has been represented in the 1D Flood Modeller component of the model.</li>
[[File:FMT QGIS 1D2D Code Polygon Digitisation.JPG|500px]]
+
[[File:FMT QGIS 1D2D Code Polygon Digitisation.JPG|400px]]
  
 
<li> Observe how the code polygon has been digitised downstream of node FC01.11. In this case, no code polygon has been digitised over the embankment. This is because overtopping of the embankment will be modelled in the 2D TUFLOW component of the model. The '''2d_bc_FMT_M01_HX_001_L.shp''' layer created previously contains additional HX boundary polylines at the upstream and downstream faces of the embankment to allow for overtopping.</li>  
 
<li> Observe how the code polygon has been digitised downstream of node FC01.11. In this case, no code polygon has been digitised over the embankment. This is because overtopping of the embankment will be modelled in the 2D TUFLOW component of the model. The '''2d_bc_FMT_M01_HX_001_L.shp''' layer created previously contains additional HX boundary polylines at the upstream and downstream faces of the embankment to allow for overtopping.</li>  
[[File:FMT QGIS 1D2D Code Bank Digitasation.JPG|600px]]
+
[[File:FMT QGIS 1D2D Code Bank Digitasation.JPG|400px]]
  
 
<li>Save the file</li>
 
<li>Save the file</li>
 +
 +
<div style="background-color: #D6E9E0; margin: 20px; text-align: center;
 +
border: 5px solid #1ABDC9">
 +
  <p style="font-weight: bold; color: #E20177">Key Tip!</p>
 +
  <p> Cells may also be deactivated within a model by using a cell code of '0' instead of '-1'. A value of 0 removes these cells from the computation entirely which has the benefit of reducing computation time and output file sizes. </p>
 +
</div>
 +
 
Please return to the [[Flood_Modeller_Tutorial_Module01#Modify_Simulation_Control_Files|Flood Modeller Tutorial Model]].
 
Please return to the [[Flood_Modeller_Tutorial_Module01#Modify_Simulation_Control_Files|Flood Modeller Tutorial Model]].

Latest revision as of 00:25, 8 December 2018

    Introduction

    In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D solution. The width of the deactivated 2D area should be approximately equal to the width of the 1D cross-sections. This step essentially replaces the conveyance of the deactivated 2D area with an equivalent 1D conveyance.

    Method

  1. Import in an empty 2d_bc_empty_R.shp layer from within the FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty folder.
  2. Save the layer as 2d_bc_FMT_M01_HX_001_R.shp in the FMT_tutorial\FMT_M01\TUFLOW\model\gis folder.
  3. Open the Inactive_area.shp GIS layer from Module_Data\Module_01\gis folder. Select all objects from within this layer, copy and paste into 2d_bc_FMT_M01_HX_001_R.shp.
  4. For all polygons assign a 'type' attribute of 'CD'. This designates the digitised polygon as a code polygon where the 2D cells within it may be either active or inactive.
  5. For all polygons assign a 'f' attribute of '-1'. A cell code of '-1' deactivates all cells within the digitised code polygons.
  6. FMT QGIS 1D2D Code attribute.JPG
  7. Observe how the code polygon has been digitised between nodes FC01.35 and FC01.34. The polygon covers the area between these two Flood Modeller nodes. This is because overtopping of the embankment at this location has been represented in the 1D Flood Modeller component of the model.
  8. FMT QGIS 1D2D Code Polygon Digitisation.JPG
  9. Observe how the code polygon has been digitised downstream of node FC01.11. In this case, no code polygon has been digitised over the embankment. This is because overtopping of the embankment will be modelled in the 2D TUFLOW component of the model. The 2d_bc_FMT_M01_HX_001_L.shp layer created previously contains additional HX boundary polylines at the upstream and downstream faces of the embankment to allow for overtopping.
  10. FMT QGIS 1D2D Code Bank Digitasation.JPG
  11. Save the file
  12. Key Tip!

    Cells may also be deactivated within a model by using a cell code of '0' instead of '-1'. A value of 0 removes these cells from the computation entirely which has the benefit of reducing computation time and output file sizes.

    Please return to the Flood Modeller Tutorial Model.