Difference between revisions of "FM Tute M01 QGIS 1D2D Banks"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
  
 
=Method=
 
=Method=
<li>Import in an empty <b>2d_bc_empty_p.shp</b> layer from within the TUFLOW\model\gis\empty folder and save as <b>2d_bc_hxi_FMT_001_P.shp</b>. </li>
+
<li>Import in an empty <b>2d_bc_empty.shp</b> layer from within the FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty folder.</li>
 +
<li>Save the layer as <b>2d_bc_hxi_FMT_001_P.shp</b> in the FMT_tutorial\FMT_M01\TUFLOW\model\gis folder. </li>
 
<li>Open the <b>1D_2D_Points_P.shp</b> GIS layer from Module_Data\Module_01\gis folder. Select all objects from within this layer, copy and paste into <b>2d_bc_hxi_FMT_001_P.shp</b>. </li>
 
<li>Open the <b>1D_2D_Points_P.shp</b> GIS layer from Module_Data\Module_01\gis folder. Select all objects from within this layer, copy and paste into <b>2d_bc_hxi_FMT_001_P.shp</b>. </li>
 
<li>Interrogate one of the digitised points and inspect the attributes. The ‘type’ attribute is ‘ZP’ to denote that it is a z-point which will define the elevation on the banks. The ‘f’ attribute is the elevation of the bank link in mAOD. </li>
 
<li>Interrogate one of the digitised points and inspect the attributes. The ‘type’ attribute is ‘ZP’ to denote that it is a z-point which will define the elevation on the banks. The ‘f’ attribute is the elevation of the bank link in mAOD. </li>

Revision as of 22:16, 11 November 2016

    Introduction

    In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modeller watercourse to the 2D TUFLOW floodplain.
    Note that it is these cell elevations that determine whether water spills from the 1D Flood Modeller domain into the 2D TUFLOW domain. The bank elevations of the Flood Modeller 1D cross-sections do not control the spill.

    Method

  1. Import in an empty 2d_bc_empty.shp layer from within the FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty folder.
  2. Save the layer as 2d_bc_hxi_FMT_001_P.shp in the FMT_tutorial\FMT_M01\TUFLOW\model\gis folder.
  3. Open the 1D_2D_Points_P.shp GIS layer from Module_Data\Module_01\gis folder. Select all objects from within this layer, copy and paste into 2d_bc_hxi_FMT_001_P.shp.
  4. Interrogate one of the digitised points and inspect the attributes. The ‘type’ attribute is ‘ZP’ to denote that it is a z-point which will define the elevation on the banks. The ‘f’ attribute is the elevation of the bank link in mAOD.
  5. Save the file.
  6. FMT 1D2D Banks.JPG Please return to the Flood Modeller Tutorial Model.