Difference between revisions of "HEC-RAS to TUFLOW"

From Tuflow
Jump to navigation Jump to search
Line 11: Line 11:
  
 
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.
 
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.
 +
 +
== Input Processing ==
 +
 +
== Example Utility Syntax ==
 +
 +
== Utility Output ==
  
 
= HEC-RAS DSS Data to TUFLOW Conversion (coming soon)=
 
= HEC-RAS DSS Data to TUFLOW Conversion (coming soon)=

Revision as of 03:53, 5 February 2015

Introduction

This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW. If you have any suggestions to be included in these pages, please email support@tuflow.com.

HEC-RAS Geometric Data to TUFLOW Conversion (SDF_to_GIS.exe)

This utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include:

  1. 1D centerline GIS information
  2. Cross section GIS locations
  3. Cross-section data in csv format

The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.

Input Processing

Example Utility Syntax

Utility Output

HEC-RAS DSS Data to TUFLOW Conversion (coming soon)