Difference between revisions of "InfoWorks ICM to TUFLOW"

From Tuflow
Jump to navigation Jump to search
Line 56: Line 56:
 
|1D Subcatchment ||Subcatchment||1d_sa_subcatchment||Only the Geometry is exported.
 
|1D Subcatchment ||Subcatchment||1d_sa_subcatchment||Only the Geometry is exported.
 
|-
 
|-
|rowspan="14" | 1D Structures ||Bridge||1d_nwk_Bridges||Bridge methods are different so the bridge would need to be rebuilt in TUFLOW/Estry.  Only the link geometry is exported.
+
|rowspan="15" | 1D Structures ||Bridge||1d_nwk_Bridges||Bridge methods are different so the bridge would need to be rebuilt in TUFLOW/Estry.  Only the link geometry is exported.
 
|-
 
|-
 
| Channel||1d_nwk_Channels||Geometry exported.  Need to export shape to csv file and link to 1d_nwk_channels file.
 
| Channel||1d_nwk_Channels||Geometry exported.  Need to export shape to csv file and link to 1d_nwk_channels file.

Revision as of 18:52, 18 June 2021

Introduction

This page outlines an approach for conversion of an InfoWorks ICM model to an Estry/TUFLOW format so that the 1D and 2D networks can be replicated in TUFLOW and used to generate a TUFLOW model.

InfoWorks ICM Network Conversion

The InfoWorks data formats are native and therefore do require access to InfoWorks in order to convert the data. Note, that the following steps can be undertaken with a InfoWorks ICM Viewer licence and a full licence is not currently required. Although the InfoWorks ICM data formats are proprietry, it is relatively easy to use the Open Data Export Centre within InfoWorks ICM to export the model geometry data to open GIS layer formats (both shapefile and MIF/Mid format). The following steps will outline exporting to shapefiles but similar can be undertaken for MIF/MID. To open the Open Data Export Centre in InfoWorks ICM, open your network in the geoplan, select the relevant scenario, and go to Network->Export->Using Open Date Export Centre. You’ll be presented with the following dialog which allows you to export the InfoWorks network data to a variety of formats.

ODEC.png

The data in InfoWorks ICM is stored in a number of database tables for each network type (eg, a separate table for nodes, conduits, 2D zones etc…).

Quick Export of Geometry Data

To get a quick idea of the 1D network, it’s possible to export 2 tables, ‘All Links’ and ‘All Nodes’. Set the Export type to ‘Shape File’ and select ‘Automap’ to export the InfoWorks fields. Provide a filename and save location and click Export.

400px

400px

Once exported the two shape files can be opened in GIS to view the network links and nodes.

Export to TUFLOW Formats

Within the Open Data Export Centre, it is possible to provide the Export Field Names and to map to them from the internal fields within the InfoWorks tables. This allows you to export directly to a shapefile with a TUFLOW format. For example, in the below image, the Export fields are set up to replicate the TUFLOW 1d_nwk file format. The relevant InfoWorks fields are then mapped to these to convert the InfoWorks format to a TUFLOW shapefile format.

400px

Once the mappings have been set up, they can be saved as a Config file by using the ‘Save Config…’ option. Once a copy has been saved, the config file can be re-used to apply the same field mappings to subsequent exports. It should be noted that not all TUFLOW fields have an equivalent InfoWorks field and vice versa, therefore in some situations there will be some modeller input required to ensure the data is imported in the correct manner. Note in the 'Field type' column there are a number of different options specified. These are:-

  • Constant-Allows the user to specify a constant value, for example, specify a constant value of '1' for the 'Code' field when exporting 2D Zones. It is also used when exporting a null value.
  • Field-This is used to directly map an InfoWorks ICM field to a TUFLOW/Estry field. For example, copying the 'conduit_length' field to the 'Len_or_ANA' field for conduits.
  • SQL-This allows a simple structured query language (SQL) script to export a combination of fields. For example, the ID is set to US_node_ID + link_suffix.
  • Script-This allows the user to utilise a ruby script to filter out exported items or to convert fields. For example, for conduits, conduits with an InfoWorks shape type of 'CIRC' can be exported to TUFLOW link types 'C', shape types 'RECT' to 'R' and all others to 'I'.

It is also possible to export all InfoWorks fields at the end of the shape file and then use GIS to post-process this for conversions and other simple translations. An example configuration file which contains mappings for nodes, pipes, 2D components and 1D structures can be obtained from support@tuflow.com. The config file provides a good starting point for the conversion and further mapping of fields between InfoWorks and TUFLOW. Note, that currently the config file is set up to export geometry tables only and will not export tables containing cross-sections, head-discharge curves and similar. TUFLOW are not responsible for the accuracy of the config file and subsequent translation of data.

This approach can be used to export on a table by table approach although it is possible to save to the same config file. This allows one config file to set up all the mappings for each of the table exports. The downside of this approach is the time-consuming nature of exporting each table individually.

Use of Ruby Scripts

It’s possible to utilise the Ruby Scripting interface within InfoWorks ICM to speed up the export. A ruby script can be run to call the Open Data Export Centre, and export all requested tables, using a specified config file automatically, significantly reducing the number of button clicks. An example Ruby Script is available from support@tuflow.com which exports the tables as shown in Table 1.

Ruby Script Conversion

Component InfoWorks Table Name TUFLOW File Notes
1D Node Node 1d_mh_pit Headloss Approach is assumed to be TUFLOW’s default Engelund approach.
1D Pipes Conduit 1d_nwk_pipe Conduit shape ‘CIRC’ are set as Type ‘C’ and shape ‘RECT’ are set as type ‘R’, otherwise the conduit shape is set to I. Where ‘I’, the shape will need separately defining. Conduit Width/Height are converted from ‘mm’ to ‘m’.
1D Subcatchment Subcatchment 1d_sa_subcatchment Only the Geometry is exported.
1D Structures Bridge 1d_nwk_Bridges Bridge methods are different so the bridge would need to be rebuilt in TUFLOW/Estry. Only the link geometry is exported.
Channel 1d_nwk_Channels Geometry exported. Need to export shape to csv file and link to 1d_nwk_channels file.
Culvert Inlet 1d_nwk_Culvert_Inlet Geometry exported but no direct equivalent in TUFLOW currently.
Culvert Outlet 1d_nwk_Culvert_Outlet Geometry exported but no direct equivalent in TUFLOW currently.
Flap Valve 1d_nwk_Flap_Valve Converted to a circular, uni-directional conduit.
Flume 1d_nwk_Flume Geometry exported but no direct equivalent in TUFLOW currently.
Inline Bank 1d_nwk_Inline_Bank Imported as an irregular weir. Section data needs bringing across.
Irregular Weir 1d_nwk_Irregular_Weir Imported as an irregular weir. Section data needs bringing across.
Orifice 1d_nwk_Orifice Geometry Exported.
Pump 1d_nwk_Pump Geometry Exported. Operational Control may need specifying.
Screen 1d_nwk_Screen Geometry Exported.
Siphon 1d_nwk_Siphon Geometry Exported.
Sluice 1d_nwk_Sluices Geometry Exported.
User Control 1d_nwk_User_Control Geometry Exported.
Weirs 1d_nwk_Weirs Geometry Exported.
1D River Reach River Reach 1d_nwk_River_Reaches Geometry Exported and needs tying into section data. See below section on river reaches.
2D Domain 2D Zone 2D_Code Geometry Exported, Code region set to 1.
2D Point Source 2D_bc_P Set to QT boundary.
2D Boundary 2D_bc_L .
2D Boundary 2D_bc_L_Line_source Set to QT Boundary.
Roughness Zone 2D_mat Material ID set to Manning's n value. Need to generate materials csv file with Material ID equal to the Manning's n value.
Infiltration Zone (2D) 2D_soils Defines the spatial locations of different soils types. Need to specify a separate tsoilf.
2D Initial Conditions Infiltration Zone (2D) 2D_IWL The IC Zone – hydraulics (2D) defines the location that the initial condition is applied. The initial water level will need to be obtained from the Initial Conditions (2D) object.
2D Results Objects Network Results Line (2d) 2D_po_L
Network Results Point (2d) 2D_po_P
2D Topography Modifications Mesh Level Zone 2D_zsh_R_MLZ Geometry Exported
Mesh Zone 2D_zsh_R_MZ Geometry Exported
2D Structures Porous Wall 2d_lfcsh_Porous_Wall Geometry Exported
Base Linear Structure(2D) 2d_lfcsh_BLS Geometry Exported
Sluice Linear Structure(2D) 2d_lfcsh_SLS Geometry Exported
Bridge Linear Structure(2D) 2d_lfcsh_BridgeLS Geometry Exported

Where the notes show 'Geometry Exported', it is envisaged that there will be some user interaction to confirm the model schematisation.

To run the script, you’ll again need to run InfoWorks ICM with a viewer licence or greater. With the desired network in the geoplan, go to Network->Run Ruby Script. Navigate to and select the ruby script, in the below this is ICM_Out_to_shp_1.rb.

Ruby.png

The script will then begin running and prompt the user to select a config file. Navigate and select the relevant config file.

Config.png

The user will then be prompted where they would like to export the data too. Select an appropriate file directory. The ruby script will then cycle through the list of tables within the script and export the tables automatically. Once complete the script will return a log highlighting the location of the exported files. All network objects are exported regardless of system type. System type is exported as an additional field in the shape files to enable filtering within GIS as required.

Ruby log message.png

The exported shape files can then be opened in GIS for further inspection and once checked can be linked together using the various TUFLOW control files. A set of generic control files for this are in progress.

InfoWorks ICM Network
ICM network.png

TUFLOW Network
TUFLOW network.png

Exporting a River Reach

The steps above will export the river reach links into a shape file format. These contain the location of the individual reaches and are equivalent to the 1d_nwk_l within TUFLOW. To export River Sections, within InfoWorks you'll need to use an SQL to export the cross-section data (note this is slightly different to river section data). In progress.

Exporting Boundary Conditions

Inflow, level and rainfall boundaries are all held in separate database objects within InfoWorks. These can be exported directly to .csv file format which can then be modified to put it into a TUFLOW format and a bc_dbase file generated to relate the time-varying data to the relevant model node.

InfoWorks ICM Rainfall Time-Varying Data
ICM Boundary data.png

TUFLOW Rainfall Boundary Time-Varying Data
TUFLOW Boundary data.png

Exporting a Gridded Ground model

Within InfoWorks, select the gridded ground model, right click and choose Export->to ESRI ASCII grid files. This will export into a file format that can be directly used within TUFLOW.

Other Considerations

Real Time Control (RTC) objects in InfoWorks will need to be rewritten as TUFLOW operational control rules with TUFLOW Operation Control (TOC) files. Shapefile limitations mean that field names and values can only be 11 characters long. This can mean that some node ids and other information is truncated.