QGIS Relief Shading

From Tuflow
Revision as of 14:40, 22 June 2021 by Chris Huxley (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

    Method

    Relief shading gives a DEM a more "3D" look. To use relief shading in QGIS, follow the steps outlined below:

  1. Ensure that you have your DEM open in QGIS, and have an appropriate colour map shading. The DEM without relief shading is shown below.
  2. QGIS relief shading 01.png


  3. From the menu items select - Raster >>> DEM (Terrain Models).
  4. Select the input DEM, and an output filename (a new hillshading DEM will be created). Make sure the Mode is set to Hillshade.
  5. QGIS relief shading 02.png


  6. Open the output file. Position this in the Layer Control section above the DEM, and set a transparency for the layer.
  7. QGIS relief shading 03.png


  8. The DEM should now have relief shading, the relief shaded DEM is shown below.
  9. QGIS relief shading 04.png




Up
Go-up.png Back to QGIS Tips And Tricks