Deletion log

Below is a list of the most recent deletions.

20:19, 24 December 2025 RussellGardner talk contribs deleted page Flood Modeller Tutorial Module01 Provisional (content was: "=Introduction= In this module, an existing 2D TUFLOW domain is linked to a Flood Modeller 1D model. The 2D domain represents the floodplain, while the 1D model represents the watercourse and in-channel structures. Linked 1D–2D models combine the strengths of both approaches. Here, the 1D scheme represents the largely unidirectional flow of the watercourse, while the 2D scheme captures the more complex floodplain hydraulics. In the below 2D model example, the main channel...")
20:19, 24 December 2025 RussellGardner talk contribs deleted page Flood Modeller Tutorial Model Provisional (content was: "=Introduction= The objective of the Flood Modeller - TUFLOW modules is to demonstrate how TUFLOW links to the external Flood Modeller 1D scheme and the methods available to create this link. They are designed to supplement existing documentation and assume prior knowledge of both Flood Modeller and TUFLOW software packages. These modules were developed by BMT in collaboration with Jacobs. Comments, requests and feedback can be sent to [mailto:support@tuflow.com support@tuflow...")
20:19, 24 December 2025 RussellGardner talk contribs deleted page Flood Modeller Tutorial Module02 Provisional (content was: "= Introduction = In this module, a proposed development is represented within an existing model by adding TUFLOW 1D pipe network elements, which are then linked with Flood Modeller Pro. This will include: * Modification of the floodplain topography through the creation of a 3D TIN surface. * Revision of the land use. * Addition of pipes and pits in ESTRY to represent the underground network. * Linking of the pipe network in ESTRY with the Flood Modeller network. *...")
14:35, 16 December 2025 Teegan.Burke talk contribs deleted page TUFLOW 1D2D SX Advice (content was: "= Introduction = With the release of TUFLOW HPC (in 2017) and the continuous improvement of GPU hardware compute capability, there is an industry trend for models of higher resolution. As such, the 2D cell size in flood models is becoming smaller and smaller. Testing has shown in some instances reducing the 2D cell size may lead to model instability at 1D/2D SX locations. This page discusses this observation, the cause and available methods to correct the instability. Topics o...")
22:25, 31 October 2025 Pavlina Monhartova talk contribs deleted page Tutorial Site FMP Familiarisation QGIS (content was: "= Introduction = QGIS is used to view the aerial image and elevation data of the model. = Method = Set up a workspace to contain aerial imagery and elevation data of the model in correct projection. === Set the Projection === <ol> <li>Set the projection of the workspace: :*Go to Project > Properties. :*In the CRS tab, type 'WGS 84 / UTM zone...", and the only contributor was "RussellGardner" (talk))
20:10, 31 October 2025 Pavlina Monhartova talk contribs deleted page Softlok Dongles (content was: "=Introduction= This page provides information pertaining to the Softlok (blue) dongles. These dongles are no longer issued as of August 2010 as the vendor after several requests could not provide 64-bit support, however they continue to be supported by future 32-bit versions of TUFLOW. SoftLok dongles can be exchanged for a new WIBU (metal) dongle for a nominal fee (please contact [mailto:sales@tuflow.com sales@tuflow.com]). The Wibu_Dongles | WIBU (metal) dong...")
10:33, 23 October 2025 Abigail.lillo talk contribs deleted page TUFLOW file types (Content is already in the Manual)
22:31, 16 October 2025 RussellGardner talk contribs deleted page File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part3.mp4 (content was: "n/a", and the only contributor was "RussellGardner" (talk))
22:30, 16 October 2025 RussellGardner talk contribs deleted page File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part2.mp4 (content was: "n/a", and the only contributor was "RussellGardner" (talk))
22:30, 16 October 2025 RussellGardner talk contribs deleted page File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part1.mp4 (content was: "n/a", and the only contributor was "RussellGardner" (talk))
22:30, 16 October 2025 RussellGardner talk contribs deleted page File:FMP ESTRY 1D Link Module 02 QGIS SHP Part3.mp4 (content was: "n/a", and the only contributor was "RussellGardner" (talk))
22:30, 16 October 2025 RussellGardner talk contribs deleted page File:FMP ESTRY 1D Link Module 02 QGIS SHP Part2.mp4 (content was: "n/a", and the only contributor was "RussellGardner" (talk))
22:30, 16 October 2025 RussellGardner talk contribs deleted page File:FMP ESTRY 1D Link Module 02 QGIS SHP Part1.mp4 (content was: "n/a", and the only contributor was "RussellGardner" (talk))
14:47, 10 October 2025 Chris Huxley talk contribs deleted page User Guide Network Licences (content was: "This section is relevant for people with a Network TUFLOW licence. Please refer to Free DEMO Version New User Guide if you don't have a licence or Local Licence New User Guide if you have a Local licence. <ol> <li> Download and install the Licencing Dongle Drivers (CodeMeter RunTime Kit) on the Network Host computer: Installing Licensing Software. ''Note: The Network Host does not...")
13:23, 29 September 2025 Abrar.Alttahir talk contribs deleted page 12da to from mif (content was: "=Introduction= '''12da_to_from_GIS.exe''' converts .12da files from the 12D software [http://www.12d.com (www.12d.com)] to and from .mif and .shp files. If importing/exporting to/from 12D and a GIS simply specify the file that you wish to have translated. If the file has a .12da (or a .4da) extension, the program converts it to a .mif/.mid file format. If the file has a .mif extension the program converts it to a .12da file. Note, when converting from a .12da file to a ....")
16:01, 12 August 2025 Abigail.lillo talk contribs deleted page TUFLOW 2D Hydraulic Structures draft
14:58, 8 August 2025 Pavlina Monhartova talk contribs deleted page Groundwater Modelling Advice Draft (content was: " Page Under Construction = Common Questions Answered (FAQ) = == What are the benefits of integrating groundwater modelling into flood simulations? == The addition of a groundwater model accounts for the attenuation of the rainfall-runoff response and the discharge of soil water to creeks. This hel...", and the only contributor was "Abrar.Alttahir" (talk))
09:37, 7 August 2025 Abigail.lillo talk contribs undeleted page File:2d lfcsh thinline updated.png (1 revision and 1 file)
09:37, 7 August 2025 Abigail.lillo talk contribs deleted page File:2d lfcsh thinline updated.png
09:33, 7 August 2025 Abigail.lillo talk contribs undeleted page File:2d lfcsh thinline updated.png (1 file)
19:01, 6 August 2025 Abigail.lillo talk contribs deleted page File:2d lfcsh thinline updated.png
16:27, 24 July 2025 Pavlina Monhartova talk contribs deleted page QGIS Intallation with OSGeo4W (content was: "#REDIRECT QGIS Installation with OSGeo4W", and the only contributor was "Emilie Nielsen" (talk))
16:26, 24 July 2025 Pavlina Monhartova talk contribs deleted page Tutorial M04 002 Check Files QGIS GPKG draft (content was: "#REDIRECT Tutorial M04 002 Check Files QGIS GPKG", and the only contributor was "Abigail.lillo" (talk))
16:26, 24 July 2025 Pavlina Monhartova talk contribs deleted page Tutorial M04 002 Check Files QGIS draft (content was: "#REDIRECT Tutorial M04 002 Check Files QGIS", and the only contributor was "Abigail.lillo" (talk))
16:26, 24 July 2025 Pavlina Monhartova talk contribs deleted page Tutorial M04 002 GIS Inputs QGIS GPKG draft (content was: "#REDIRECT Tutorial M04 002 GIS Inputs QGIS GPKG", and the only contributor was "Abigail.lillo" (talk))
16:26, 24 July 2025 Pavlina Monhartova talk contribs deleted page Tutorial M04 002 GIS Inputs QGIS draft (content was: "#REDIRECT Tutorial M04 002 GIS Inputs QGIS", and the only contributor was "Abigail.lillo" (talk))
16:25, 24 July 2025 Pavlina Monhartova talk contribs deleted page Tutorial M04 002 Results QGIS draft (content was: "#REDIRECT Tutorial M04 002 Results QGIS", and the only contributor was "Abigail.lillo" (talk))
16:24, 24 July 2025 Pavlina Monhartova talk contribs deleted page Hardware Benchmarking (2018-03-AA) (content was: "#REDIRECT Hardware Benchmarking", and the only contributor was "Chris Huxley" (talk))
15:26, 24 July 2025 Pavlina Monhartova talk contribs undeleted page Hardware Benchmarking (2018-03-AA) (1 revision)
15:15, 24 July 2025 Pavlina Monhartova talk contribs deleted page Hardware Benchmarking (2018-03-AA) (content was: "#REDIRECT Hardware Benchmarking", and the only contributor was "Chris Huxley" (talk))
20:33, 16 July 2025 RussellGardner talk contribs deleted page Flood Modeller Tutorial Model/Archive (content was: "=Archived Module Data= The Flood Modeller-TUFLOW linking tutorial datasets created for MapInfo and ArcGIS can be downloaded at the following links: *[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_Data_MapInfo.zip MapInfo Data Download] *[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_Data_ArcGIS.zip A...", and the only contributor was "RussellGardner" (talk))
20:32, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Pipe Network (content was: "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing the culverts and pits. The pipe network will be connected to the 2D model domain and and a depth-discharge relationship defined at the pits via the creation of a Pit Inlet Database. <b...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Flood Modeller1D/ESTRY 1D Link (content was: "=Introduction= This page describes the method in QGIS for linking TUFLOW 1D ESTRY networks to a 1D river channel represented within Flood Modeller. Firstly, a pipe network represented in ESTRY will be linked to Flood Modeller using an X1DH link. The Flood Modeller 1D network will then be extended downstream by connecting it to an ESTRY river network using...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Define Roughness (content was: "=Introduction= This page describes the method for creating the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surface roughness or bed-resistance values (e.g. Manning’s n) are assigned to each of these land use areas via the materials.csv file present in the model folder. =Method= <ol> <li>Cop...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Define Elevations (content was: "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the [https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual] for more information on this feature. =Method= <ol> <li>Copy the contents of the FMT_Tutorial\Module_data\Module_02\2...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Boundary Conditions (content was: "<ol> =Introduction= This page details the method for using QGIS to create the GIS based boundary layer. The layer will be populated with the name of each inflow boundary which will be linked to the boundary database in the following steps of this module. The created boundary will be applied as a source-area boundary in a 2d_sa layer. =Method= '''Bo...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Pipe Network (content was: "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing the culverts and pits. The pipe network will be connected to the 2D model domain and and a depth-discharge relationship defined at the pits via the creation of a Pit Inlet Database. <b...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Flood Modeller1D/ESTRY 1D Link (content was: "=Introduction= This page describes the method in QGIS for linking TUFLOW 1D ESTRY networks to a 1D river channel represented within Flood Modeller. Firstly, a pipe network represented in ESTRY will be linked to Flood Modeller using an X1DH link. The Flood Modeller 1D network will then be extended downstream by connecting it to an ESTRY river network using...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Define Roughness (content was: "=Introduction= This page describes the method for creating the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surface roughness or bed-resistance values (e.g. Manning’s n) are assigned to each of these land use areas via the materials.csv file present in the model folder. =Method= <ol> <li>Cop...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Define Elevations (content was: "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the [https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual] for more information on this feature. =Method= <ol> <li>Copy the contents of the FMT_Tutorial\Module_data\Module_02\2...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Boundary Conditions (content was: "<ol> =Introduction= This page details the method for using QGIS to create the GIS based boundary layer. The layer will be populated with the name of each inflow boundary which will be linked to the boundary database in the following steps of this module. The created boundary will be applied as a source-area boundary in a 2d_sa layer. =Method= '''Bo...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 ARC Define Elevations Archive (content was: "=Introduction= This page describes the method for using ArcGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the [https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual] for more information on this feature. =Method= <ol> <li>Copy the contents of the FMT_Tutorial\Module_data\Module_02...", and the only contributor was "RussellGardner" (talk))
20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP x1D Nodes (content before blanking was: "<ol> =Introduction= We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify the spatial location of each of the linked Flood Modeller nodes. This allows TUFLOW to read the water levels from the Flood Modeller model and apply them to the TUFLOW domains as 2D water level boundaries. =Method= <li> Open the FloodModeller_Nodes_P.shp layer from the Module_Data\Mo...")
20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP Banks (content was: "<ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modeller watercourse to the 2D TUFLOW floodplain. Note that it is these cell elevations that determine whether water spills from the 1D Flood Modeller domain into the 2D TUFLOW domain. T...", and the only contributor was "RussellGardner" (talk))
20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP 1D2D Links (content was: "<ol> =Introduction= In this section we will set up the Flood Modeller-TUFLOW linkage to apply a water level boundary to the 2D cells along the 1D/2D interface. In the 2D boundary condition (2d_bc) GIS layer, we define the location at which this link occurs. The 2D water level applied at the 2D boundary cells is calculated in the 1D Flood Modeller component...", and the only contributor was "RussellGardner" (talk))
20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP 1D2D Code (content was: "<ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D representation of the open channel. The width of the deactivated 2D area should be approximately equal to the width of the 1D cross-sections. This step essentially replaces the conveyance of the deactivated 2D area with an equivalen...", and the only contributor was "RussellGardner" (talk))
20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG x1D Nodes (content was: "<ol> =Introduction= We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify the spatial location of each of the linked Flood Modeller nodes. This allows TUFLOW to read the water levels from the Flood Modeller model and apply them to the TUFLOW domains as 2D wa...", and the only contributor was "RussellGardner" (talk))
20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG Banks (content was: "<ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modeller watercourse to the 2D TUFLOW floodplain. Note that it is these cell elevations that determine whether water spills from the 1D Flood Modeller domain into the 2D TUFLOW domain. T...", and the only contributor was "RussellGardner" (talk))
20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG 1D2D Links (content was: "<ol> =Introduction= In this section we will set up the Flood Modeller-TUFLOW linkage to apply a water level boundary to the 2D cells along the 1D/2D interface. In the 2D boundary condition (2d_bc) GIS layer, we define the location at which this link occurs. The 2D water level applied at the 2D boundary cells is calculated in the 1D Flood Modeller componen...", and the only contributor was "RussellGardner" (talk))
20:29, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG 1D2D Code (content was: "<ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D representation of the open channel. The width of the deactivated 2D area should be approximately equal to the width of the 1D cross-sections. This step essentially replaces the conveyance of the deactivated 2D area with an equivalen...", and the only contributor was "RussellGardner" (talk))