Difference between revisions of "TUFLOW Message 0003"

From Tuflow
Jump to navigation Jump to search
m
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Occurs if trying to assign the Simulation Log Path using the -slp TUFLOW.exe option and the path specified exceeds 64 characters.  This option is only available for SoftLok dongles.  Also see [[TUFLOW_Message_0002|ERROR 0002]].
 
|message_desc=Occurs if trying to assign the Simulation Log Path using the -slp TUFLOW.exe option and the path specified exceeds 64 characters.  This option is only available for SoftLok dongles.  Also see [[TUFLOW_Message_0002|ERROR 0002]].
|suggestions=When using the -slp option specify a simulation log path of less than 65 characters in length.  For details on alternative methods for setting a simulation log path see <font color="green"><tt>Simulations Log Folder == </tt></font> command in the 2010 TUFLOW Manual.
+
|suggestions=When using the -slp option specify a simulation log path of less than 65 characters in length.  For details on alternative methods for setting a simulation log path see <font color="blue"><tt>Simulations Log Folder </tt></font> <tt><font color="red">==</font></tt> command in the 2010 TUFLOW Manual.
 
|discussion_page=* [[Talk:TUFLOW Message 0003|Discuss Message 0003]]
 
|discussion_page=* [[Talk:TUFLOW Message 0003|Discuss Message 0003]]
 
|link3=''
 
|link3=''

Revision as of 14:06, 25 June 2015

TUFLOW Message
ERROR 0003 - Simulation log path cannot exceed 64 characters.

Alternate Message
NA

Message Type
ERROR

Description
Occurs if trying to assign the Simulation Log Path using the -slp TUFLOW.exe option and the path specified exceeds 64 characters. This option is only available for SoftLok dongles. Also see ERROR 0002.

Suggestions
When using the -slp option specify a simulation log path of less than 65 characters in length. For details on alternative methods for setting a simulation log path see Simulations Log Folder == command in the 2010 TUFLOW Manual.


Up
Go-up.png 0xxx Messages