Difference between revisions of "TUFLOW Message 0030"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=These two commands cannot be used together.  Event text definitions can only be defined using one of these commands.  <font color="green"><tt>BC Event Source == </tt></font> became available with the 2010-10 release and allows up to 10 different event texts to be specified for assigning different event names, and is much more powerful than <font color="green"><tt>BC Event Text == </tt></font> which only allows one.
+
|message_desc=These two commands cannot be used together.  Event text definitions can only be defined using one of these commands.  <font color="green"><tt>BC Event Source == </tt></font> became available with the 2010-10 release and allows multiple event texts to be specified for assigning different event names to different boundaries, and is much more powerful than <font color="green"><tt>BC Event Text == </tt></font> which only allows one event text at any one time within the model. Also see [[TUFLOW Message 0031|Discuss Message 0031]]
 
|suggestions=Rework the commands so that only one of the above commands exists.  Note, there is no limit to the number of times either of these commands is specified in a model, they just can't both exist in the same model.
 
|suggestions=Rework the commands so that only one of the above commands exists.  Note, there is no limit to the number of times either of these commands is specified in a model, they just can't both exist in the same model.
 
|discussion_page=* [[Talk:TUFLOW Message 0030|Discuss Message 0030]]
 
|discussion_page=* [[Talk:TUFLOW Message 0030|Discuss Message 0030]]

Revision as of 09:04, 10 August 2011

TUFLOW Message
ERROR 0030 - Cannot use "BC Event Source" and "BC Event Text" together.

Alternate Message
NA

Message Type
ERROR

Description
These two commands cannot be used together. Event text definitions can only be defined using one of these commands. BC Event Source == became available with the 2010-10 release and allows multiple event texts to be specified for assigning different event names to different boundaries, and is much more powerful than BC Event Text == which only allows one event text at any one time within the model. Also see Discuss Message 0031

Suggestions
Rework the commands so that only one of the above commands exists. Note, there is no limit to the number of times either of these commands is specified in a model, they just can't both exist in the same model.


Up
Go-up.png 0xxx Messages