Difference between revisions of "TUFLOW Message 0037"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 0037 - Could not apply Set IWL == AUTO. More than one different water level boundary found. | + | |tuflow_message=ERROR 0037 - Could not apply <font color="blue"><tt>Set IWL </tt></font><font color="red"><tt>== </tt></font> AUTO. More than one different water level boundary found. |
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=If using the <tt>Set IWL == Auto</tt> feature the IWL in the model is automatically set based on the water level at the downstream boundary. In this case more than one water level boundary has been encountered and TUFLOW is unable to set the IWL automatically. | + | |message_desc=If using the <tt><font color="blue">Set IWL </font><font color="red">== </font>Auto</tt> feature the IWL in the model is automatically set based on the water level at the downstream boundary. In this case more than one water level boundary has been encountered and TUFLOW is unable to set the IWL automatically. |
|suggestions=Ensure that only a single water level boundary is used or remove the <tt>Set IWL == Auto</tt> command and set the IWL manually using the <tt>Set IWL == <value>, Read GIS IWL == <gis layer> or Read Grid IWL == <grid dataset></tt> commands. | |suggestions=Ensure that only a single water level boundary is used or remove the <tt>Set IWL == Auto</tt> command and set the IWL manually using the <tt>Set IWL == <value>, Read GIS IWL == <gis layer> or Read Grid IWL == <grid dataset></tt> commands. | ||
|discussion_page=* [[Talk:TUFLOW Message 0037|Discuss Message 0037]] | |discussion_page=* [[Talk:TUFLOW Message 0037|Discuss Message 0037]] | ||
Revision as of 11:41, 21 June 2022
TUFLOW Message
ERROR 0037 - Could not apply Set IWL == AUTO. More than one different water level boundary found.
Alternate Message
NA
Message Type
ERROR
Description
If using the Set IWL == Auto feature the IWL in the model is automatically set based on the water level at the downstream boundary. In this case more than one water level boundary has been encountered and TUFLOW is unable to set the IWL automatically.
Suggestions
Ensure that only a single water level boundary is used or remove the Set IWL == Auto command and set the IWL manually using the Set IWL == <value>, Read GIS IWL == <gis layer> or Read Grid IWL == <grid dataset> commands.
| Up |
|---|
 0xxx Messages
|