Difference between revisions of "TUFLOW Message 0048"

From Tuflow
Jump to navigation Jump to search
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 0048 - No 1D WLLs and no 2D Cells found within Output Zone
+
|tuflow_message=ERROR 0048 - No 1D WLLs and no 2D Cells found within code area or Output Zone
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
Line 6: Line 6:
  
 
|suggestions=Ensure Check that the active domain and code is selecting cells. Ensure that the code boundary is set to 1 (ie, that the cells will be active), check that the defined domain and the code area overlap (use the 2d_dom_check and the 2d_code_check), also check that layers are in the same projection.
 
|suggestions=Ensure Check that the active domain and code is selecting cells. Ensure that the code boundary is set to 1 (ie, that the cells will be active), check that the defined domain and the code area overlap (use the 2d_dom_check and the 2d_code_check), also check that layers are in the same projection.
|discussion_page=* [[Talk:TUFLOW Message 0048|Discuss Message 0048]]
+
<br>
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_0047|Message 0047]]
 
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
|nextlink=[[TUFLOW_Message_0051|Message 0051]]
 
 
}}
 
}}

Latest revision as of 12:47, 30 June 2023

TUFLOW Message
ERROR 0048 - No 1D WLLs and no 2D Cells found within code area or Output Zone

Alternate Message
NA

Message Type
ERROR

Description
There are no active 2D cells or 1D WLLs in code area or output zone.

Suggestions
Ensure Check that the active domain and code is selecting cells. Ensure that the code boundary is set to 1 (ie, that the cells will be active), check that the defined domain and the code area overlap (use the 2d_dom_check and the 2d_code_check), also check that layers are in the same projection.


Up
Go-up.png 0xxx Messages