Difference between revisions of "TUFLOW Message 0051"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=A run-time option could not be recognised.  Examples of options are -b for batching simulations; -c to copy a model; and -t to test the input only.  For a complete list of options see Table 5.2 in the 2010-10 TUFLOW Manual.
+
|message_desc=A run-time option could not be recognised.  Examples of options are: -b for batching simulations; -c to copy a model; and -t to test the input only.  For a complete list of options see Table 5.2 in the 2010-10 TUFLOW Manual.
 
|suggestions=Check the command line being used to simulate TUFLOW and identify/correct the invalid option.
 
|suggestions=Check the command line being used to simulate TUFLOW and identify/correct the invalid option.
 
|discussion_page=* [[Talk:TUFLOW Message 0051|Discuss Message 0051]]
 
|discussion_page=* [[Talk:TUFLOW Message 0051|Discuss Message 0051]]

Revision as of 11:29, 10 August 2011

TUFLOW Message
ERROR 0051 - Invalid option specified on TUFLOW command line.

Alternate Message
NA

Message Type
ERROR

Description
A run-time option could not be recognised. Examples of options are: -b for batching simulations; -c to copy a model; and -t to test the input only. For a complete list of options see Table 5.2 in the 2010-10 TUFLOW Manual.

Suggestions
Check the command line being used to simulate TUFLOW and identify/correct the invalid option.


Up
Go-up.png 0xxx Messages