Difference between revisions of "TUFLOW Message 0144"

From Tuflow
Jump to navigation Jump to search
 
(3 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=The xf file cannot be read.
+
|message_desc=Reached the end of the xf file before all the data is read. It is mostly likely that the xf file is corrupted, e.g. TUFLOW was terminated while writing the xf file.  
 
|suggestions=Delete the xf file to let it recreate from scratch next time the model is run.
 
|suggestions=Delete the xf file to let it recreate from scratch next time the model is run.
|discussion_page=* [[Talk:TUFLOW Message 0144|Discuss Message 0144]]
+
<br>
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_0141|Message 0141]]
 
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
|nextlink=[[TUFLOW_Message_0160|Message 0160]]
 
 
}}
 
}}

Latest revision as of 11:04, 22 December 2022

TUFLOW Message
ERROR 0144 - End of file encountered reading xf file.

Alternate Message
NA

Message Type
ERROR

Description
Reached the end of the xf file before all the data is read. It is mostly likely that the xf file is corrupted, e.g. TUFLOW was terminated while writing the xf file.

Suggestions
Delete the xf file to let it recreate from scratch next time the model is run.


Up
Go-up.png 0xxx Messages