Difference between revisions of "TUFLOW Message 0251"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
|suggestions=Simulate model with Build 2011-09-AB or higher. | |suggestions=Simulate model with Build 2011-09-AB or higher. | ||
<br> | <br> | ||
| − | |prelink=[[ | + | |prelink=[[TUFLOW_Message_0249|Message 0249]] |
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | |uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_0252|Message 0252]] | |nextlink=[[TUFLOW_Message_0252|Message 0252]] | ||
}} | }} | ||
Revision as of 17:25, 12 December 2022
TUFLOW Message
ERROR 0251 – Exceeded limit of GIS layers open at any one time.
Alternate Message
NA
Message Type
ERROR
Description
Produced when using Build 2011-09-AA due to the reworking of GIS routines to write output and check SHP layers which was previously limited to 10 input layers in the 2010-10 release. THis limit has been increased to 100 for the 2011-09-AB release.
Suggestions
Simulate model with Build 2011-09-AB or higher.
| Up |
|---|
 0xxx Messages
|