Difference between revisions of "TUFLOW Message 0255"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=WARNING 0255 - One or more GIS layers not closed during simulation - please notify support@tuflow.com. |alt_msg=NA |type=WARNING |message_des...")
 
Line 10: Line 10:
 
|prelink=[[TUFLOW_Message_0254|Message 0254]]
 
|prelink=[[TUFLOW_Message_0254|Message 0254]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
|nextlink=[[TUFLOW_Message_0401|Message 0401]]
+
|nextlink=[[TUFLOW_Message_0301|Message 0301]]
 
}}
 
}}

Revision as of 10:41, 17 October 2011

TUFLOW Message
WARNING 0255 - One or more GIS layers not closed during simulation - please notify support@tuflow.com.

Alternate Message
NA

Message Type
WARNING

Description
This warning is a cross-check on any GIS layers (input or output) that were not closed off immediately after they were completed, but were closed off at the end of the simulation. Please email support@tuflow.com with the .tlf file attached if this message occurs. The GIS layers are closed off neatly as part of this check and the occurrence of this message should not affect the simulation or the outputs in any way.

Suggestions
No action required other than to email support@tuflow.com with the .tlf file so that the development team can identify the layers not closed off.


Up
Go-up.png 0xxx Messages