Difference between revisions of "TUFLOW Message 0304"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=The number of regions within a region exceeds the maximum (currently set to 10,000).
 
|message_desc=The number of regions within a region exceeds the maximum (currently set to 10,000).
 
|suggestions=Disaggregate the region, so that each polygon is a separate region.  To do this in MapInfo, make the layer editable, select all objects and chose '''Objects >> Disaggregate''' from the menu items.
 
|suggestions=Disaggregate the region, so that each polygon is a separate region.  To do this in MapInfo, make the layer editable, select all objects and chose '''Objects >> Disaggregate''' from the menu items.
|discussion_page=* [[Talk:TUFLOW Message 0304|Discuss Message 0304]]
+
<br>
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_0303|Message 0303]]
 
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
|nextlink=[[TUFLOW_Message_0305|Message 0305]]
 
 
}}
 
}}

Latest revision as of 11:11, 22 December 2022

TUFLOW Message
ERROR 0304 - Exceeded maximum number of polygons in region below of

Alternate Message
NA

Message Type
ERROR

Description
The number of regions within a region exceeds the maximum (currently set to 10,000).

Suggestions
Disaggregate the region, so that each polygon is a separate region. To do this in MapInfo, make the layer editable, select all objects and chose Objects >> Disaggregate from the menu items.


Up
Go-up.png 0xxx Messages