Difference between revisions of "TUFLOW Message 0307"

From Tuflow
Jump to navigation Jump to search
Line 9: Line 9:
 
<br>
 
<br>
 
Alternatively, a projection line may be extracted from a MIF file by following these steps:
 
Alternatively, a projection line may be extracted from a MIF file by following these steps:
<li> In a GIS, create or open a layer in the Cartesian projection to be used for the model.<br>
+
# In a GIS, create or open a layer in the Cartesian projection to be used for the model.<br>
<li> Export the layer in MIF/MID format.<br>
+
# Export the layer in MIF/MID format.<br>
<li> Open the .mif file in a text editor, copy the whole line starting with “CoordSys” (usually the 4th or 5th line).<br>
+
# Open the .mif file in a text editor, copy the whole line starting with “CoordSys” (usually the 4th or 5th line).<br>
<li> Paste the text after the command paste after <font color="blue"><tt>MI Projection </tt></font> <font color="red"><tt>== </tt></font> in the .tcf file.<br></li>  
+
# Paste the text after the command paste after <font color="blue"><tt>MI Projection </tt></font> <font color="red"><tt>== </tt></font> in the .tcf file.<br>
  
 
<font color="blue"><tt>MI Projection </tt></font> <font color="red"><tt>== </tt></font> <tt>CoordSys Earth Projection 8, 13, "m", 153, 0, 0.9996, 500000, 10000000 Bounds (-7745874.38492, 1999.40969607) (8745874.38492, 19998000.5903)</tt><br>
 
<font color="blue"><tt>MI Projection </tt></font> <font color="red"><tt>== </tt></font> <tt>CoordSys Earth Projection 8, 13, "m", 153, 0, 0.9996, 500000, 10000000 Bounds (-7745874.38492, 1999.40969607) (8745874.38492, 19998000.5903)</tt><br>

Revision as of 22:08, 14 January 2016

TUFLOW Message
WARNING 0307 - No MI Projection or mif header file ",a," found. Non-Earth Coordinates will be used.

Alternate Message
NA

Message Type
WARNING

Description
The geographic projection for GIS input and output data in MID/MIF format has not been defined using the command MI Projection == . When this command is omitted, TUFLOW searches for a file 'Header.mif' in each folder it opens a MID/MIF GIS file and extracts the projection from this file. If no 'Header.mif' file is found, non-earth coordinates are assumed.

Suggestions
Create a projection file by following the instructions outlined on this Wiki page.The created layer then needs to be referenced using the following .tcf command:

MI Projection == ..\model\mi\Model_Projection.mif

Alternatively, a projection line may be extracted from a MIF file by following these steps:

  1. In a GIS, create or open a layer in the Cartesian projection to be used for the model.
  2. Export the layer in MIF/MID format.
  3. Open the .mif file in a text editor, copy the whole line starting with “CoordSys” (usually the 4th or 5th line).
  4. Paste the text after the command paste after MI Projection == in the .tcf file.

MI Projection == CoordSys Earth Projection 8, 13, "m", 153, 0, 0.9996, 500000, 10000000 Bounds (-7745874.38492, 1999.40969607) (8745874.38492, 19998000.5903)

If a model has a mixture of .mif and .shp files as input, then both the tcf commands MI Projection == and SHP Projection == should be specified.


Up
Go-up.png 0xxx Messages