Difference between revisions of "TUFLOW Message 0425"

Revision as of 16:47, 9 June 2022

TUFLOW Message
ERROR 0425 - End of .shp file encountered whilst reading object type.

Alternate Message
NA

Message Type
ERROR

Description
This error typically occurs if the shp file is empty (i.e. doesn't include any features) or it hasn't been saved in GIS software.

Suggestions
Remove the file reference from the TUFLOW control file if no features are intended or digitise the required feature. Save the edits.

Up
0xxx Messages

@@ Line 3: / Line 3: @@
 |alt_msg=NA
 |type=[[ERROR]]
-|message_desc=This error typically occurs if the shp file is empty (i.e. doesn't include any features)
+|message_desc=This error typically occurs if the shp file is empty (i.e. doesn't include any features) or it hasn't been saved in GIS software.
-|suggestions= Either remove the file reference from the TUFLOW control file if no features are intended, or fix the input by drawing the feature you wish to use in the file which is producing the error.
+|suggestions= Remove the file reference from the TUFLOW control file if no features are intended or digitise the required feature. Save the edits.
 |discussion_page=* [[Talk:TUFLOW Message 0425|Discuss Message 0425]]
 |link3=''