Difference between revisions of "TUFLOW Message 1002"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=No boundary condition found for node "a".
 
|message_desc=No boundary condition found for node "a".
 
|suggestions=Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database.
 
|suggestions=Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database.
|discussion_page=* [[Talk:TUFLOW Message 1002|Discuss Message 1002]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_1001|Message 1001]]
 
|prelink=[[TUFLOW_Message_1001|Message 1001]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|nextlink=[[TUFLOW_Message_1003|Message 1003]]
 
|nextlink=[[TUFLOW_Message_1003|Message 1003]]
 
}}
 
}}

Revision as of 15:40, 1 July 2022

TUFLOW Message
ERROR 1002 - No boundary condition found for node "a".

Alternate Message
NA

Message Type
ERROR

Description
No boundary condition found for node "a".

Suggestions
Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database.


Up
Go-up.png 1xxx Messages