Difference between revisions of "TUFLOW Message 1009"
Jump to navigation
Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1009 - Incompatible H & Q boundaries specified for node |alt_msg=NA |type=ERROR |message_desc=???? |suggestions=???? |discussion_page=...') |
|||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=Both water level (H) and flow (Q) type objects have been specified at 1D node. Both of these boundary types can not be specified at a single node. |
| − | |suggestions= | + | |suggestions=Seperate or remove boundary conditions. |
|discussion_page=* [[Talk:TUFLOW Message 1009|Discuss Message 1009]] | |discussion_page=* [[Talk:TUFLOW Message 1009|Discuss Message 1009]] | ||
|link3='' | |link3='' | ||
Revision as of 17:54, 6 February 2011
TUFLOW Message
ERROR 1009 - Incompatible H & Q boundaries specified for node
Alternate Message
NA
Message Type
ERROR
Description
Both water level (H) and flow (Q) type objects have been specified at 1D node. Both of these boundary types can not be specified at a single node.
Suggestions
Seperate or remove boundary conditions.
| Up |
|---|
 1xxx Messages
|