Difference between revisions of "TUFLOW Message 1009"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|message_desc=Both water level (H) and flow (Q) type objects have been specified at 1D node. Both of these boundary types can not be specified at a single node. | |message_desc=Both water level (H) and flow (Q) type objects have been specified at 1D node. Both of these boundary types can not be specified at a single node. | ||
|suggestions=Seperate or remove boundary conditions. | |suggestions=Seperate or remove boundary conditions. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1008|Message 1008]] | |prelink=[[TUFLOW_Message_1008|Message 1008]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1010|Message 1010]] | |nextlink=[[TUFLOW_Message_1010|Message 1010]] | ||
}} | }} | ||
Revision as of 15:49, 1 July 2022
TUFLOW Message
ERROR 1009 - Incompatible H & Q boundaries specified for node
Alternate Message
NA
Message Type
ERROR
Description
Both water level (H) and flow (Q) type objects have been specified at 1D node. Both of these boundary types can not be specified at a single node.
Suggestions
Seperate or remove boundary conditions.
| Up |
|---|
 1xxx Messages
|