TUFLOW Message 1041

From Tuflow
Revision as of 17:26, 6 February 2011 by tuflow>Par
Jump to navigation Jump to search

TUFLOW Message
ERROR 1041 - Culvert branch splits downstream of channel ",a," at Node ",a,". Could not interpolate invert.

Alternate Message
ERROR 1041 - Culvert branch splits upstream of channel ",a," at Node ",a,". Could not interpolate invert.

Message Type
ERROR

Description
Multiple upstream or downstream channel, unable to interpolate inverts.

Suggestions
A useful tip at a junction of 1D channels is to use a connector (Channel_Type of “X”) for connecting a side tributary or pipe into the main flowpath. TUFLOW will then be able to interpolate inverts. Specify inverts on culvert object.


Up
Go-up.png 1xxx Messages