Difference between revisions of "TUFLOW Message 1068"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=The data in the first column of a cross-section is not unique or in ascending order. For a XZ (offset - elevation), the X data (offset) should be unique and in ascending order.  The same applies to all cross-section types, e.g. for a HW (height - width) section, the height values should be increasing.
 
|message_desc=The data in the first column of a cross-section is not unique or in ascending order. For a XZ (offset - elevation), the X data (offset) should be unique and in ascending order.  The same applies to all cross-section types, e.g. for a HW (height - width) section, the height values should be increasing.
 
|suggestions=Check data, remove duplicate values and sort by first column.
 
|suggestions=Check data, remove duplicate values and sort by first column.
|discussion_page=* [[Talk:TUFLOW Message 1068|Discuss Message 1068]]
+
 
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_1067|Message 1067]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1069|Message 1069]]
 
 
}}
 
}}

Latest revision as of 14:38, 22 December 2022

TUFLOW Message
ERROR 1068 - First column values in cross-section data not in ascending order. Incorrect values are:

Alternate Message
NA

Message Type
ERROR

Description
The data in the first column of a cross-section is not unique or in ascending order. For a XZ (offset - elevation), the X data (offset) should be unique and in ascending order. The same applies to all cross-section types, e.g. for a HW (height - width) section, the height values should be increasing.

Suggestions
Check data, remove duplicate values and sort by first column.


Up
Go-up.png 1xxx Messages