Difference between revisions of "TUFLOW Message 1092"

From Tuflow
Jump to navigation Jump to search
Line 2: Line 2:
 
|tuflow_message=ERROR 1092 - No flow area provided for pit type ",a,".
 
|tuflow_message=ERROR 1092 - No flow area provided for pit type ",a,".
 
|alt_msg=NA
 
|alt_msg=NA
|type=[[ERROR]] [[WARNING]]
+
|type=[[ERROR]]<br>
 +
[[WARNING]]
 
|message_desc=Caused when a zero width or zero flow area for Q pits is encountered. This message is outputted for the TUFLOW 2012-05 release and prevents TUFLOW from crashing or for NaNs to appear. If 'Defaults == Pre-2012' is set, a WARNING 1092 or 1093 is issued and the model simulation will not stop.  
 
|message_desc=Caused when a zero width or zero flow area for Q pits is encountered. This message is outputted for the TUFLOW 2012-05 release and prevents TUFLOW from crashing or for NaNs to appear. If 'Defaults == Pre-2012' is set, a WARNING 1092 or 1093 is issued and the model simulation will not stop.  
 
|suggestions=Check for a zero width or zero flow area within a Q pit.  
 
|suggestions=Check for a zero width or zero flow area within a Q pit.  

Revision as of 16:50, 19 September 2014

TUFLOW Message
ERROR 1092 - No flow area provided for pit type ",a,".

Alternate Message
NA

Message Type
ERROR
WARNING

Description
Caused when a zero width or zero flow area for Q pits is encountered. This message is outputted for the TUFLOW 2012-05 release and prevents TUFLOW from crashing or for NaNs to appear. If 'Defaults == Pre-2012' is set, a WARNING 1092 or 1093 is issued and the model simulation will not stop.

Suggestions
Check for a zero width or zero flow area within a Q pit.


Up
Go-up.png 1xxx Messages