Difference between revisions of "TUFLOW Message 1101"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
 
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
 
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release. <br>
 
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release. <br>
Check that the 1d_nwk layer being read in via the 'Read GIS Network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
+
Check that the 1d_nwk layer being read in via the '<font color="blue"><tt>Read GIS Network </tt></font><font color="red"><tt>== </tt></font>' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
 
|discussion_page=* [[Talk:TUFLOW Message 1101|Discuss Message 1101]]
 
|discussion_page=* [[Talk:TUFLOW Message 1101|Discuss Message 1101]]
 
|link3=''
 
|link3=''

Revision as of 13:44, 23 June 2022

TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found

Alternate Message
ERROR 1101 - Less than the mandatory 10 1d_pit attributes found.

Message Type
ERROR

Description
1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).

Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release.
Check that the 1d_nwk layer being read in via the 'Read GIS Network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.


Up
Go-up.png 1xxx Messages