Difference between revisions of "TUFLOW Message 1102"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 8: Line 8:
 
"X" Type channels do not require an ID.
 
"X" Type channels do not require an ID.
 
|suggestions=Give each 1d_nwk a valid and unique ID.
 
|suggestions=Give each 1d_nwk a valid and unique ID.
|discussion_page=* [[Talk:TUFLOW Message 1102|Discuss Message 1102]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_1101|Message 1101]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1103|Message 1103]]
 
 
}}
 
}}

Latest revision as of 15:12, 22 December 2022

TUFLOW Message
ERROR 1102 - Channel at ",a,",",a," does not have an ID.

Alternate Message
NA

Message Type
ERROR

Description
1d channels (1d_nwk) should have a unique identifier up to 12 characters in length in the "ID" GIS attribute. This may contain any character except for quotes and commas, and cannot be blank. As a general rule, spaces and special characters (eg. “\”) should be avoided, although they are accepted. The same ID can be used for a channel and a node, but no two nodes and no two channels can have the same ID. Since Build 2005-05-AN, digitised nodes can have their ID left blank and TUFLOW will assign an ID.

"X" Type channels do not require an ID.

Suggestions
Give each 1d_nwk a valid and unique ID.


Up
Go-up.png 1xxx Messages