Difference between revisions of "TUFLOW Message 1105"

From Tuflow
Jump to navigation Jump to search
 
Line 6: Line 6:
 
|suggestions=Enter a valid width into Width_or_Dia and a height into Height_or_WF GIS attributes.  These are fields 14 and 15 in 1d_nwk layer, values in metres.
 
|suggestions=Enter a valid width into Width_or_Dia and a height into Height_or_WF GIS attributes.  These are fields 14 and 15 in 1d_nwk layer, values in metres.
  
|prelink=[[TUFLOW_Message_1104|Message 1104]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1106|Message 1106]]
 
 
}}
 
}}

Latest revision as of 15:13, 22 December 2022

TUFLOW Message
ERROR 1105 - Width and/or height of R culvert is less than or equal to zero.

Alternate Message
NA

Message Type
ERROR

Description
Width and/or height of rectangular culvert (R type channel) is less than or equal to zero.

Suggestions
Enter a valid width into Width_or_Dia and a height into Height_or_WF GIS attributes. These are fields 14 and 15 in 1d_nwk layer, values in metres.


Up
Go-up.png 1xxx Messages