Difference between revisions of "TUFLOW Message 1107"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Irregular type culvert (I type channels) are only available when Culvert Flow == Method E.  For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual.  As of 2008-08-AA, the default for Culvert Flow == Method E.
+
|message_desc=Irregular type culvert (I type channels) are only available with <tt>Culvert Flow == Method E</tt>.  For more information on the <tt>Culvert Flow == </tt>command, please see Section 4.7.4.3 of the TUFLOW manual.  As of 2008-08-AA, the default for <tt>Culvert Flow == Method E</tt>.
|suggestions=If using irregular culverts, use the default is Culvert Flow == Method E.  If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
+
|suggestions=If using irregular culverts, use the default is <tt>Culvert Flow == Method E</tt>.  If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
 
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]]
 
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]]
 
|link3=''
 
|link3=''

Revision as of 08:54, 1 February 2011

TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E.

Alternate Message
NA

Message Type
ERROR

Description
Irregular type culvert (I type channels) are only available with Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.

Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.


Up
Go-up.png 1xxx Messages