Difference between revisions of "TUFLOW Message 1107"

From Tuflow
Jump to navigation Jump to search
m
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E.
+
|tuflow_message=ERROR 1107 - Irregular culverts only available for <font color="blue"><tt>Culvert Flow </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>Method E </tt></font>.
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Irregular type culvert (I type channels) are only available with <tt>Culvert Flow == Method E</tt>.  For more information on the <tt>Culvert Flow == </tt>command, please see Section 4.7.4.3 of the TUFLOW manual.  As of 2008-08-AA, the default for <tt>Culvert Flow == Method E</tt>.
+
|message_desc=Irregular type culvert (I type channels) are only available with <tt><font color="blue">Culvert Flow </font><font color="red">== </font><font color="black">Method E</font></tt>.  For more information on the <tt>Culvert Flow == </tt>command, please see Section 4.7.4.3 of the TUFLOW manual.  As of 2008-08-AA, the default for <tt>Culvert Flow == Method E</tt>.
 
|suggestions=If using irregular culverts, use the default is <tt>Culvert Flow == Method E</tt>.  If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
 
|suggestions=If using irregular culverts, use the default is <tt>Culvert Flow == Method E</tt>.  If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
 
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]]
 
|discussion_page=* [[Talk:TUFLOW Message 1107|Discuss Message 1107]]

Revision as of 13:48, 23 June 2022

TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E .

Alternate Message
NA

Message Type
ERROR

Description
Irregular type culvert (I type channels) are only available with Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.

Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.


Up
Go-up.png 1xxx Messages