Difference between revisions of "TUFLOW Message 1107"
Jump to navigation
Jump to search
m |
|||
| Line 10: | Line 10: | ||
|prelink=[[TUFLOW_Message_1106|Message 1106]] | |prelink=[[TUFLOW_Message_1106|Message 1106]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_1108|Message 1108]] |
}} | }} | ||
Revision as of 12:44, 12 January 2016
TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E.
Alternate Message
NA
Message Type
ERROR
Description
Irregular type culvert (I type channels) are only available with Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.
Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.
| Up |
|---|
 1xxx Messages
|