TUFLOW Message 1107

From Tuflow
Revision as of 16:33, 31 January 2011 by tuflow>Par
Jump to navigation Jump to search

TUFLOW Message
ERROR 1107 - Irregular culverts only available for Culvert Flow == Method E.

Alternate Message
NA

Message Type
ERROR

Description
Irregular type culvert (I type channels) are only available when Culvert Flow == Method E. For more information on the Culvert Flow == command, please see Section 4.7.4.3 of the TUFLOW manual. As of 2008-08-AA, the default for Culvert Flow == Method E.

Suggestions
If using irregular culverts, use the default is Culvert Flow == Method E. If you require a previous Culvert Flow method for backwater compatability, irregular culverts cannot be used.


Up
Go-up.png 1xxx Messages