Difference between revisions of "TUFLOW Message 1117"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
*SXG<br> | *SXG<br> | ||
*SXS<br> | *SXS<br> | ||
| − | For a detalied description of these options see Section 4.5.1.3 Connecting Pits and Nodes to 2D Domains and Table 4.14 1D model Network (1d_nwk) Attribute Descriptions of the TUFLOW manual (2010 version). | + | For a detalied description of these options see Section 4.5.1.3 (Connecting Pits and Nodes to 2D Domains) and Table 4.14 (1D model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version). |
|suggestions=Specify a valid attribute as per the list above. | |suggestions=Specify a valid attribute as per the list above. | ||
|discussion_page=* [[Talk:TUFLOW Message 1117|Discuss Message 1117]] | |discussion_page=* [[Talk:TUFLOW Message 1117|Discuss Message 1117]] | ||
Revision as of 08:35, 1 February 2011
TUFLOW Message
ERROR 1117 - Invalid Conn_2D attribute at pit or node. Cannot exceed 3 characters.
Alternate Message
NA
Message Type
ERROR
Description
An illegal Conn_2D attribute has been inputted on a 1d pit or node object. The Conn_2D attribute is used to automatically link to the 2D. Valid options are available:
- SX
- SXL
- SXZ
- SXG
- SXS
For a detalied description of these options see Section 4.5.1.3 (Connecting Pits and Nodes to 2D Domains) and Table 4.14 (1D model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version).
Suggestions
Specify a valid attribute as per the list above.
| Up |
|---|
 1xxx Messages
|