Difference between revisions of "TUFLOW Message 1124"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
 
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
 
|suggestions=Check if the cross-section line is crossing with multiple 1d channels.  
 
|suggestions=Check if the cross-section line is crossing with multiple 1d channels.  
|discussion_page=* [[Talk:TUFLOW Message 1124|Discuss Message 1124]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_1123|Message 1123]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1125|Message 1125]]
 
 
}}
 
}}

Latest revision as of 15:19, 22 December 2022

TUFLOW Message
ERROR 1124 - Cross-section line for channel ",a," already allocated to another channel.

Alternate Message
NA

Message Type
ERROR

Description
If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.

Suggestions
Check if the cross-section line is crossing with multiple 1d channels.


Up
Go-up.png 1xxx Messages