Difference between revisions of "TUFLOW Message 1124"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=There isn't an available cross section for channel "a".
+
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
|suggestions=If the cross section has three vertices, middle vertex should be snapped to the beginning or end of channel "a". Cross sections with two vertices only needs to intersect the channel.  
+
|suggestions=Check if the cross-section line is crossing with multiple 1d channels.  
 
|discussion_page=* [[Talk:TUFLOW Message 1124|Discuss Message 1124]]
 
|discussion_page=* [[Talk:TUFLOW Message 1124|Discuss Message 1124]]
 
|link3=''
 
|link3=''

Revision as of 13:53, 20 May 2021

TUFLOW Message
ERROR 1124 - Cross-section line for channel ",a," already allocated to another channel.

Alternate Message
NA

Message Type
ERROR

Description
If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.

Suggestions
Check if the cross-section line is crossing with multiple 1d channels.


Up
Go-up.png 1xxx Messages