Difference between revisions of "TUFLOW Message 1152"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
|message_desc=A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.
 
|message_desc=A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.
 
|suggestions=Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section.
 
|suggestions=Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section.
|discussion_page=* [[Talk:TUFLOW Message 1152|Discuss Message 1152]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_1151|Message 1151]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1153|Message 1153]]
 
 
}}
 
}}

Latest revision as of 15:29, 22 December 2022

TUFLOW Message
CHECK 1152 - For channel ",a,", using centre cross-section and ignoring end cross-section(s).

Alternate Message
NA

Message Type
CHECK

Description
A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.

Suggestions
Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section.


Up
Go-up.png 1xxx Messages