Difference between revisions of "TUFLOW Message 1200"

From Tuflow
Jump to navigation Jump to search
Line 4: Line 4:
 
|type=[[CHECK]]
 
|type=[[CHECK]]
 
|message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels.
 
|message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels.
|suggestions=Node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.
+
|suggestions=Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.
 
|discussion_page=* [[Talk:TUFLOW Message 1200|Discuss Message 1200]]
 
|discussion_page=* [[Talk:TUFLOW Message 1200|Discuss Message 1200]]
 
|link3=''
 
|link3=''

Revision as of 12:58, 30 October 2019

TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.

Alternate Message
NA

Message Type
CHECK

Description
Node at start of connector can only be used for setting up channel inverts and pit channels.

Suggestions
Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.


Up
Go-up.png 1xxx Messages