TUFLOW Message 1200

From Tuflow
Revision as of 12:57, 30 October 2019 by Pavlina Monhartova (talk | contribs)
Jump to navigation Jump to search

TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.

Alternate Message
NA

Message Type
CHECK

Description
Node at start of connector can only be used for setting up channel inverts and pit channels.

Suggestions
Node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.


Up
Go-up.png 1xxx Messages