Difference between revisions of "TUFLOW Message 1208"

From Tuflow
Jump to navigation Jump to search
Line 11: Line 11:
 
* Water level lines (<tt><font color="blue">Read GIS WLL </font><font color="red">== </font></tt>)
 
* Water level lines (<tt><font color="blue">Read GIS WLL </font><font color="red">== </font></tt>)
 
* WLL points  (<tt><font color="blue">Read GIS WLL Points </font><font color="red">== </font></tt>)
 
* WLL points  (<tt><font color="blue">Read GIS WLL Points </font><font color="red">== </font></tt>)
|discussion_page=* [[Talk:TUFLOW Message 1208|Discuss Message 1208]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_1207|Message 1207]]
 
|prelink=[[TUFLOW_Message_1207|Message 1207]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|nextlink=[[TUFLOW_Message_1209|Message 1209]]
 
|nextlink=[[TUFLOW_Message_1209|Message 1209]]
 
}}
 
}}

Revision as of 14:00, 5 July 2022

TUFLOW Message
ERROR 1208 - Reading node network data. Check 1d_nwk layer has correct attributes.

Alternate Message
NA

Message Type
ERROR

Description
An error has occurred whilst reading 1d network data (1d_nwk). Check that the attributes of the layer match those in the Table 4.14 (1D Model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version). An empty 1d_nwk file is written with the Write Empty GIS Files == tcf command.

Suggestions
Ensure the layer has the correct attributes and ensure that the Read GIS Network == is only for used for network data and not other 1D GIS data. Other data types have use a specific GIS command. For example:

  • 1d boundary (Read GIS BC == )
  • Tabular data links such as cross-sections or nodal area tables (Read GIS Table Links == )
  • Manholes (Read GIS Manhole == )
  • Initial Water level (Read GIS IWL == )
  • Water level lines (Read GIS WLL == )
  • WLL points (Read GIS WLL Points == )


Up
Go-up.png 1xxx Messages