Difference between revisions of "TUFLOW Message 1238"
Jump to navigation
Jump to search
Melissa1987 (talk | contribs) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=An error was encountered when trying to read cross-section, na table or bg table data. This error could stem from the GIS layer referring to the tabulated data, or within the data itself. | |message_desc=An error was encountered when trying to read cross-section, na table or bg table data. This error could stem from the GIS layer referring to the tabulated data, or within the data itself. | ||
|suggestions=Review the 1d_xs, 1d_na or 1d_bg layers. Check that the source is correctly linked and there are no characters that should not be there (commas instead of full stops, percentage signs or brackets). Also check the tabulated data that it is configured correctly. Refer to section 5.10 of the 2016 manual for more information on cross-sections and their configuration. | |suggestions=Review the 1d_xs, 1d_na or 1d_bg layers. Check that the source is correctly linked and there are no characters that should not be there (commas instead of full stops, percentage signs or brackets). Also check the tabulated data that it is configured correctly. Refer to section 5.10 of the 2016 manual for more information on cross-sections and their configuration. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 15:56, 22 December 2022
TUFLOW Message
ERROR 1238 - Reading cross-section, nodal area or bridge object layer.
Alternate Message
NA
Message Type
ERROR
Description
An error was encountered when trying to read cross-section, na table or bg table data. This error could stem from the GIS layer referring to the tabulated data, or within the data itself.
Suggestions
Review the 1d_xs, 1d_na or 1d_bg layers. Check that the source is correctly linked and there are no characters that should not be there (commas instead of full stops, percentage signs or brackets). Also check the tabulated data that it is configured correctly. Refer to section 5.10 of the 2016 manual for more information on cross-sections and their configuration.
| Up |
|---|
 1xxx Messages
|